A Phased Array is, basically, a stereo pair with omni outriggers.

This version is an ORTF pair of the M 300 with a pair of M 320 omni outriggers with about a 60cm spacing of the omnis, though the omni spacing can easily be adjusted to suit if 60cm is found to be too wide in a particular situation.
This is a more cost-effective rig than the M 930 + M 221 array

This can be a very effective microphone array when you need a good stereo image, but need a bit more of the “room” or the extra bass extension that an omni gives to bring in the bottom end of a grand piano or organ.

Although pictured as an ORTF rig in the centre, you can equally set the M 300 pair up as XY if you so wish.

Items Required:
1 x 211174 – M 300 stereo set
1 x 2111188 – M 320 stereo set
1 x 600177 – mounting bar
1 x 600179 – T-piece

Technical Information:

M 300 series
Mounting Bar