Subwoofers

BASIS 1

BASIS 2K

BASIS 3

BASIS 4K

A range of Professional Active Bass Loudspeakers with unprecedented control of monitor/room coupling characteristics. Also featuring integrated bass management
and LFE channel handling

Integrated bass management and LFE channel handling explained

Max SPL @ 1m: 110 dB
Bandwidth: 28 Hz - 80 Hz
Bandwidth with HPF: 40 Hz - 80 Hz
Size (H x W x D): 400 x 400 x 400 mm
Weight: 20 kg

Max SPL @ 1m: 116 dB
Bandwidth: 28 Hz - 80 Hz
Bandwidth with HPF: 40 Hz - 80 Hz
Size (H x W x D): 456 x 760 x 390 mm
Weight: 50 kg

Max SPL @ 1m: 115 dB
Bandwidth: 28 Hz - 80 Hz
Bandwidth with HPF: 40 Hz - 80 Hz
Size (H x W x D): 400 x 400 x 400 mm
Weight: 31 kg

Max SPL @ 1m: 120 dB
Bandwidth: 28 Hz - 80 Hz
Bandwidth with HPF: 40 Hz - 80 Hz
Size (H x W x D): 550 x 500 x 430 mm
Weight: 43 kg

BASIS 1 and BASIS 3: Active Bass Loudspeakers with omnidirectional dispersion characteristics

The response of the BASIS 1 extends from 28 Hz – 80 Hz, with a selectable HPF rolling off at 40 Hz. Designed to complement the RL906 studio monitors and for use as sub-woofer and LFE in 5.1 systems. XLR connectors provided for input and through connection and Bass Management of a complete 5.1 system. Continuously adjustable compensation time/phase in the range of 0 to 1 meter.

The power amplifier uses MOSFET technology. Frequency-dependent RMS level detection protects the driver from overload. A specially developed long-throw bass driver with a linear displacement of ±12 mm ensures very low distortion at low-frequencies to minimise sub-bass localisation in the room. An infinite baffle enclosure is used to achieve optimum impulse response. The system can be set to bypass mode using a cable-connected remote control. All connectors, power, bypass remote and the controls are found on the rear of the cabinet. A two-coloured LED on the front indicates the state of the amplifier and warns of clipping. The BASIS 1 is supplied in a magnetically shielded version as an option. All the electronics can be supplied in a separate box for use in OB vans, or wall installations.

The response of the BASIS 3 extends from 28 Hz – 80 Hz, with a selectable HPF rolling off at 40 Hz. Designed to complement the RL903, RL904 and RL906 studio monitors and for use as the main sub-woofer for 5.1 systems. XLR connectors provide for connection and Bass Management of a complete 5.1 system. Continuous time/phase compensation can be applied in the range of 0 to 1 meter.

The power amplifier uses MOSFET technology. Frequency-dependent RMS level detection protects the driver from overload. A specially developed long-throw bass driver with a linear displacement of ±12 mm ensures very low distortion at low-frequencies to minimise sub-bass localisation in the room.

The system can be set to bypass mode using a cable-connected remote control. All connectors, power, bypass remote and the controls are found on the rear of the cabinet. A two-coloured LED on the front indicates the state of the amplifier and warns of clipping. The BASIS 3 is supplied in a magnetically shielded version as an option. All the electronics can be supplied in a separate box for use in OB vans, or wall installations.

The response of the BASIS 2K extends from 28 Hz – 80 Hz, with a selectable HPF rolling off at 40 Hz. Designed to complement the RL903, RL904 and RL906 studio monitors and for use as the main sub-woofer for 5.1 systems. XLR connectors provide for connection and Bass Management of a complete 5.1 system. Continuous time/phase compensation can be applied in the range of 0 to 1 meter.

The power amplifier uses MOSFET technology. Frequency-dependent RMS level detection protects the driver from overload. A specially developed long-throw bass driver with a linear displacement of ±12 mm ensures very low distortion at low-frequencies to minimise sub-bass localisation in the room, and the cardioid dispersion characteristics minimise relections from the rear walls, and excitation of room modes. The system can be set to bypass mode using a cable-connected remote control. All connectors, power, bypass remote and the controls are found on the rear of the cabinet. A two-coloured LED on the front indicates the state of the amplifier and warns of clipping. The BASIS 2K is supplied in a magnetically shielded version as an option. All the electronics can be supplied in a separate box for use in OB vans, or wall installations.

The response of the BASIS 4K extends from 28 Hz – 80 Hz, with a selectable HPF rolling off at 40 Hz. Designed to complement the RL903, RL904 and RL906 studio monitors and for use as the main sub-woofer for 5.1 systems. XLR connectors provide for connection and Bass Management of a complete 5.1 system. Continuous time/phase compensation can be applied in the range of 0 to 1 meter.

The power amplifier uses MOSFET technology. Frequency-dependent RMS level detection protects the driver from overload. A specially developed long-throw bass driver with a linear displacement of ±12 mm ensures very low distortion at low-frequencies to minimise sub-bass localisation in the room, and the cardioid dispersion characteristics minimise relections from the rear walls, and excitation of room modes. The system can be set to bypass mode using a cable-connected remote control. All connectors, power, bypass remote and the controls are found on the rear of the cabinet. A two-coloured LED on the front indicates the state of the amplifier and warns of clipping. The BASIS 4K is supplied in a magnetically shielded version as an option. All the electronics can be supplied in a separate box for use in OB vans, or wall installations.